Home PBXware SERVERware TELCOware SIPmon SIPProt Desktop & Mobile UADs Appliances From Bicom Systems Wiki Contents 1 Introduction 2 Video Tutorial 3 Requirements 3.1 Identifying phone model 3.2 Phone firmware 3.3 DHCP server 3.4 PBXware version 4 Installation 4.1 Power adapter 4.2 Power over Ethernet (PoE) 4.3 Find the phone IP address 4.4 Reset to factory settings...
Make sure that your phone is loaded with appropriate firmware version, 4.3.0.2036. To find out the firmware version of your Mitel phone model open a new browser window and enter your phone IP address in order to access the phone web administration interface login...
Login to phone web administration interface with your username and password. Please note, factory default login details are username: admin and password: 22222. DHCP server Fully configured and operational DHCP server. PBXware version PBXware version 4.1.3.0 In order to find out the PBXware version: Login to PBXware Navigate to Settings: About.
Do not unplug or remove power to the phone while it is updating firmware and configurations. Registering phone This chapter describes how to identify Mitel phone model, requirements that must be met and how to register the phone using manual configuration or auto provisioning. The following topics are covered:...
Page 5
UAD settings Navigate to Settings:UAD. Make sure Mitel UAD is enabled. To check the UAD status click on the edit icon corresponding to your Mitel phone. Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Page 6
Department to which extension will belong to. Example: Sales. Click on the Save button. Registering Phone This chapter describes how to register Mitel phone using Hostname or IP Address. Hostname or IP Address Login to phone web administration interface Open a new browser window and enter your phone IP address in order to access the phone web administration interface login screen.
Caller ID PBXware extension number. Example: 1003 Authentication Name PBXware extension number. Example: 1003 Password The Secret of the extension as received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created extension.
Page 8
UAD settings. Navigate to Settings:UAD. Make sure Mitel UAD is enabled. To check the UAD status click on the edit icon corresponding to your Mitel phone. Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
Page 9
Example: john.smith@bicomsystems.com Auto Provisioning Set to Yes. MAC Address Enter Mitel phone MAC address. Example: 001565FF1536. MAC address can be found at the back of the phone. Click on the Save button. Registering Phone This chapter describes how to register Mitel phone using DHCP or TFTP.
PBXware. Dial *123 to verify registration. Configure BLF This chapter describes how to configure BLF (Busy Lamp Field) for Mitel 6867i. Login to PBXware web administration interface. Open a new browser window and enter the IP address in order to access the PBXware web administration login page.
Page 11
Make sure Auto Provisioning is set to Yes. Make sure Presence is set to "Yes". Click on the Save button to save changes. Click on Enhanced services. Click on Directory / BLF List check box and click on Save button in order to enable this feature.
Need help?
Do you have a question about the 6867i and is the answer not in the manual?
Questions and answers