Mitel 6867i Administrator's Manual page 455

CONFIGURING DND USING THE CONFIGURATION FILES
You use the following parameters to configure DND on the IP Phone:
• dnd key mode
• softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type
• softkeyN states (optional)
Note: If there is no DND key configured or if it is removed, DND is disabled on the IP
Phone.
Example
The following is an example of configuring the mode for DND in the configuration files:
dnd key mode: 2
softkey1 type: dnd
softkey1 states: idle connected incoming outgoing busy
In the above example, softkey 1 is configured for DND for line 1 only, with a "custom"
configuration. Pressing softkey 1 displays DND screens for which you can customize on the
phone.
CONFIGURATION FILES
To set DND in the configuration files, see Appendix A, the sections:
•
"DND Key Mode Settings"
•
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters"
.
page A-217
on .
page A-181
Operational Features
on
5-194