Alphanumeric Input Order For Username Prompts; Active Voice-Over-Ip (Voip) Recording - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
• SIP User Name
• SIP Display Name
• SIP Auth. Name
• FTP User Name
Note: The parameter is set to "0" (uppercase letters first) by default.
Use the following procedure in the configuration files to configure the keypad input order for
username prompts.
CONFIGURATION FILES
For the specific parameter you can set in the configuration files, see Appendix A, the section,

"Alphanumeric Input Order for Username Prompts"

ACTIVE VOICE-OVER-IP (VOIP) RECORDING

Active VoIP recording is supported by the IP phones. When using the IP phones with a Mitel
call manager supporting voice recording and a recording system with the predefined subset of
the SIP interface, administrators can configure the phones to send duplicate copies of the
transmit and receive RTP or SRTP voice packets to the voice recording system.
Notes:
1. Currently, the active VoIP recording feature is only supported when using the MiVoice
MX-ONE call manager (v4.1 or 5.0) in conjunction with ASC's EVOip 10.0 voice
recording system. Support for additional call managers and voice recording systems
will be implemented in future releases.
2. The active VoIP recording feature is disabled by default.
Both dynamic (i.e. per call) and static (i.e. per the duration that the phone is registered) recording
sessions are supported by the IP phones. Additionally, administrators have the option of
enabling a Record-On-Demand feature allowing users to initiate and terminate a call recording
session at their discretion. The call recording sessions are initiated by the voice recording
system and when the session is established, the IP phone will duplicate all of its incoming and
outgoing RTP/SRTP packets and send them to the voice recording system where they can be
archived and analyzed as required.
Notes:
1. Please contact your MiVoice MX-ONE account manager for details on how to
configure and utilize the Record-On-Demand feature.
2. As the RTP/SRTP packets sent to the voice recording system are duplicate copies,
the codec used for the original call as well as the recording are identical as well. If
active VoIP recording is required, ensure that the IP phone is configured to use the
G.711 or G.729 codec as these are currently the only two codecs supported by ASC's
EVOip 10.0 voice recording system.
Administrators must configure a whitelist for voice recording system authentication using the
"recorder addressN" parameters (where N is a number from 1 to 6). These parameters are
6-50
on .
page A-289