Configurable Positioning Of Programmed Softkeys - Mitel 6867i Administrator's Manual

To enable/disable an operational state, click the "Idle", "Connected", "Incoming", or "Out-
going" fields to check or uncheck the box.
Note:
8. Click Save Settings to save your changes.
For Programmable Keys:
9. In the "Hard Key" field, select the programmable key type you want to configure.
Note: For available type values on each IP phone model, see Appendix A, the
section,
Parameters"
In the "Value" field, enter a value to associate with the programmable key. For example,
for a Speeddial value, you can enter a number you want to use for the Speeddial key, or
12345+ as a Speeddial prefix.
10. In the "Line" field, select the line for which you want to associate the programmable key.
11. Click Save Settings to save your changes.

CONFIGURABLE POSITIONING OF PROGRAMMED SOFTKEYS

Note: Applicable to the 6867i, 6869i, and 6873i IP Phones only.
By default, when programming softkeys for the 6867i, 6869i, and 6873i IP phones, the softkey
is automatically placed (i.e. collapses) into the first available softkey slot/position on the LCD
display. For example, for the 6867i, if top softkeys 1 through 44 are set to "None" on and top
softkey 3 is programmed as a speeddial softkey with the label "Home", after saving the settings,
the "Home" speeddial softkey will appear on the first top softkey position on the LCD display.
Administrators now have the option to configure programmed softkey positioning behavior.
Enabling the "collapsed softkey screen" parameter (i.e. defining the parameter as "1" in the
configuration files) will maintain the previous behavior (as per the example above) for the 6867i
6869i, and 6873i. Disabling the parameter (i.e. defining the parameter as "0") will cause the IP
Operational states are not applicable to expansion modules.
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key
on .
page A-217
6867i Example - Collapsed Mode (Default)
Operational Features
5-150