Live Dialpad - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
6869i, and 6873i lifting the handset at any time switches back to the handset from either
the handsfree speakerphone or the headset.
• 3. Headset/Speaker - Incoming calls are sent to the headset first when the handsfree button
is pressed. By pressing the handsfree button again, you can switch back and forth between
the headset and the handsfree speakerphone. For the 6865i, 6867i, 6869i, and 6873i lifting
the handset at any time switches back to the handset from either the headset or the hands-
free speakerphone.
CONFIGURING AUDIO MODE USING THE CONFIGURATION FILES
Use the following procedure to configure the audio mode using the configuration files.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Audio Mode Settings"

LIVE DIALPAD

The "Live Dialpad" option on the IP phone turns the Live Dial Pad mode ON or OFF. With live
dial pad ON, the IP phone automatically dials out and turns ON Handsfree mode as soon as a
dial pad key or softkey is pressed. With live dial pad OFF, if you dial a number while the phone
is on-hook, lifting the receiver or pressing the Speaker/Headset button initiates a call to that
number.
*Availability of feature dependent on your phone system or service provider.
A User can turn the "Live Dialpad" ON and OFF using the IP Phone UI only. A System
Administrator can turn it ON and OFF using the IP Phone UI or the configuration files.
ENABLING/DISABLING LIVE DIALPAD USING THE CONFIGURATION
FILES
Use the following procedure to enable/disable Live Dialpad on the IP Phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
Dialpad Settings"
ENABLING/DISABLING LIVE DIALPAD USING THE IP PHONE UI
Use the following procedure to enable/disable Live Dialpad on the IP Phones
IP PHONE UI
For the 6863i/6865i:
5-47
on page 208.
on .
page A-65
"Live
.