Mitel 6867i Administrator's Manual page 202

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
For the 6863i/6865i:
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Network Settings.
4. Select Ethernet and VLAN.
To globally enable/disable VLAN and set priority for non-IP packet:
5. Select VLAN Settings.
6. Select VLAN.
7. Select Enable.
8. Press Done or Set to save the changes.
9. Select LAN Port VLAN.
10. Select Other Priority and enter a non-IP priority value from 0 to 7 for non-IP packets.
Default for this field is 5.
11. Press Done (2 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for LAN Port (Port 0):
12. Select LAN Port VLAN.
13. Select LAN Port VLAN ID and enter a value from 1 to 4095 to specify the VLAN ID for the
LAN Port.
Default is 1.
Note: Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from
1 to 4094 will allow frames from the PC port (containing a VLAN ID) to be untagged
before being forwarded to the LAN port and frames from the LAN port (without a
VLAN ID) to be tagged with the configured VLAN ID before being forwarded to the
PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095
and the PC Port VLAN ID to any ID from 1 to 4094. The following example sets the PC
port to be on VLAN 3 but the LAN port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 4095
• VLAN Settings->PC Port VLAN->PC Port VLAN ID: 3
14. Press Enter or Set to save the change.
15. Select VLAN Priority.
16. Select one of the following VLAN Protocols:
• SIP Priority
4-49