Suppress Dtmf Playback Setting - Mitel 6867i Administrator's Manual

SUPPRESS DTMF PLAYBACK SETTING

PARAMETER –
suppress dtmf playback
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
DISPLAY DTMF DIGITS SETTING
PARAMETER –
display dtmf digits
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables suppression of DTMF playback when a
number is dialed from the softkeys or programmable keys.
When you disable the suppression of DTMF playback and you press
a softkey or programmable key, the IP phone dials the stored
number and displays each digit as dialed in the LCD window. When
you enable the suppression of DTMF playback, the IP phone dials
the stored number and displays the entire number immediately in the
LCD window, allowing the call to be dialed faster.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
suppress dtmf playback: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables and disables the display of DTMF digits when dialing on the
IP phone.
DTMF is the signal sent from the phone to the network that you
generate when you press the phone's touch keys. This is also known
as "touchtone" dialing. Each key you press on your phone generates
two tones of specific frequencies. One tone is generated from a
high-frequency group of tones and the other from a low frequency
group.
If enabled, this parameter displays the digits on the IP phone display
if you are dialing from the keypad, or from a softkey or programmable
key. This parameter is disabled by default (no digits display when
dialing).
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
display dtmf digits: 1
A-203