Mitel 6867i Administrator's Manual page 464

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
phone is 10101, and the sip lineN user name for the second phone is 10102, etc., you would
configure BLA on a per-line basis for the ININ server as follows:
(# for phone 1 with appearance of phone 3)
sip line1 mode: 3
sip line1 user name: 10101 sip line1 bla number: 1010
(# for phone 2 with appearance of phone 3)
sip line1 mode: 3
sip line1 user name: 10102
sip line1 bla number: 1010
(# for phone 3)
sip line1 mode: 3
sip line1 user name: 1010
sip line1 bla number: 1010
Note: The original phone number which has the bridged line appearance on other
phones, will have the "sip lineN user name" parameter the same as the "sip lineN bla
number" (1010 in the above example on Phone 3).
Configuring Global BLA Using the Configuration Files
Use the following procedures to configure global BLA on the IP phone.
CONFIGURATION FILES
For specific global parameters you can set in the configuration files, see Appendix A, the
section,
"SIP Basic, Global Settings"
Configuring Per-Line BLA Using the Configuration Files
Use the following procedures to configure per-line BLA on the IP phone.
CONFIGURATION FILES
For specific per-line parameters you can set in the configuration files, see Appendix A, the
section,
"SIP Basic, Per-Line Settings"
5-203
on .
page A-70
on .
page A-79