Mitel 6867i Administrator's Manual page 454

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
DND ACCOUNT-BASED CONFIGURATION
An Administrator or User can configure DND on the phone-side by setting a mode for the phone
to use (account, phone, or custom). Once the mode is set, you can use the IP Phone UI to
use the DND feature.
Notes:
1. If there is only one account configured on the phone, then the mode setting is ignored
and the phone behaves as if the mode was set to "Phone".
2. You must configure a DND key on the phone to be able to use this feature via the
phone's keypad.
The following describes the DND key behavior for each DND mode.
• Account - DND key toggles the account in focus on the IP Phone UI, to ON or OFF if DND
enabled for that account.
• Phone - DND key toggles all accounts on the phone to ON or OFF.
• Custom - DND key displays custom screens on the IP Phone UI. User can select whether
to enable/disable DND per account, enable DND on all accounts, or disable DND on all
accounts.
The following table describes the DND key and Message Waiting Indicator (MWI) LEDs when
you enable DND on the IP Phone.
SOFTKEY LED BEHAVIOR
FOR ALL MODES
RED
DND key LED
has DND ON.
DND key LED OFF when current account in
focus has DND disabled.
You can configure the DND softkey and the DND mode (Account, Phone, Custom) using the
configuration files or the Mitel Web UI. Once you configure DND, you can access the DND
screen on the IP Phone UI.
Notes:
1. In the Mitel Web UI, the "Account Configuration" page replaces the previous "Call
Forward Settings" page.
2. In the IP Phone UI, the new DND key feature now has new menu screens.
3. If you make changes to the configuration for DND via the IP Phone UI, you must
refresh the Mitel Web UI screen to see the changes.
5-193
if current account in focus
MWI LED BEHAVIOR
FOR ALL MODES
MWI LED ON if current account in focus has DND
ON.
MWI LED OFF if current account in focus has DND
OFF.