Mitel 6867i Administrator's Manual page 943

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
expmodX keyN line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
• For icom, the value is the predefined intercom call number.
• For paging the value is the ip and port (the port range is from 1 to
65535).
String
N/A
N/A
expmod1 key1 value: 9
expmod1 key2 value: 411
expmod1 key3 value: 123456+ (example of a speeddial prefix)
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This is the line associated with the softkey you are configuring on the
Expansion Module. The number of applicable lines available is
dependent on the specific IP phone model.
The "expmodX keyN line" parameter can be set for the following
softkey types only:
• speeddial
• blf
• list
• acd
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
Integer
1
1-24
expmod1 key1 line: 1
expmod1 key2 line: 5
A-245