Mitel 6867i Administrator's Manual page 737

PC PORT (ETHERNET PORT 1) PARAMETERS
PARAMETER –
vlan id port 1
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
qos eth port 1 priority
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to configure a VLAN ID that associates with the physical
Ethernet Port 1 (PC port).
• Setting the "vlan id port 1" to 4095 and "vlan id" to any ID from 1
to 4094 will allow frames from the LAN port (containing a VLAN
ID) to be untagged before being forwarded to the PC port and
frames from the PC port (without a VLAN ID) to be tagged with the
configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the "vlan
id port 1" to 4095 and the "vlan id " to any ID from 1 to 4094. The
following example sets the LAN port to be on VLAN 3 but the PC
port is configured as untagged:
tagging enabled: 1
vlan id: 3
vlan id port 1: 4095
• Alternatively setting the "vlan id port 1" to any ID from 1 to 4094
and "vlan id" to 4095 will allow frames from the PC port (containing
a VLAN ID) to be untagged before being forwarded to the LAN
port and frames from the LAN port (without a VLAN ID) to be
tagged with the configured VLAN ID before being forwarded to the
PC port.
Integer
4095
1 to 4095
vlan id port 1: 3
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the priority value used for passing VLAN packets through
to a PC via Port 1.
Integer
0
0 to 7
qos eth port 1 priority: 3
A-39