Mitel 6867i Administrator's Manual page 947

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
PARAMETER –
hardkeyN value
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The value you would like to assign to the hard key you are
configuring. The "hardkeyN value" parameter can be set for the
following key types only:
• speeddial (you can enter a speeddial number for this field; optionally,
you can also enter a prefix for the speeddial value to allow the phone
to dial the prefix after you press the Speeddial key; you then enter
the rest of the number from the keypad on the phone).
• line
• blf
• spre
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
• paging
Notes:
• For speeddial the value is the phone number, extension, or prefix
number to enter for the key.
• For line the value is optional; for example L4.
• For blf the value is the extension you want to monitor.
• For spre the value is dependent on services offered by server.
• For xml you can specify a URI to use for this XML key. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$
String
N/A
N/A
A-249