Overview; References - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

OVERVIEW

An administrator can configure the IP Phone Network and SIP options from the phone UI, from
the Mitel Web UI, or the configuration files. Administrator level options are password
protected in both the IP phone UI and the Mitel Web UI.
Note: An administrator has the option of enabling and disabling the use of password
protection in the IP phone UI. This is configurable using the configuration files only. For
more information about this feature, see Appendix A, the section
on page 15.
The procedures in this section include configuring from the IP phone UI and the Mitel Web UI.
To configure the IP phones using the configuration files, see
To configure the phone using the IP phone UI, you must enter an administrator password. To
configure the phone using the Mitel Web UI, you must enter an administrator username and
password.
7
Note: In the IP phone UI, the default password is "22222". In the
Mitel Web UI, the default admin username is "Admin" and the default password is
"22222".

REFERENCES

For configuring the IP phone at the Asterisk IP PBX, see
at the Asterisk IP PBX."
For sample configuration files, see
files include basic parameters required to register the IP phone at the PBX.
4-3
Appendix B, "Configuring the IP Phone
Appendix C, "Sample Configuration Files."
"Password Settings"
Appendix , "About this Appendix."
These sample