Mitel 6867i Administrator's Manual page 225

For more information about setting the call waiting parameters, see Chapter 5, the section,
on
"Call Waiting" page 5-74
Configure Per-Line Call Waiting:
12. The "Call Waiting" field is set to "Global" by default. To enable call waiting for a specific
line, select "enabled" from the list in this field. To disable call waiting for a specific line,
select "disabled" from the list in this field.
For more information about setting the call waiting parameters, see Chapter 5, the section,
on
"Call Waiting" page 5-74
13. Click Save Settings to save your changes.
CONFIGURING BASIC SIP NETWORK SETTINGS (OPTIONAL)
You can configure SIP network settings using the configuration files, the IP Phone UI, or the
Mitel Web UI.
Note: To configure the SIP settings per-line, use the configuration files or the Mitel Web
UI.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
Basic, Global Settings"
Note: You can set global configuration only using the IP Phone UI.
For the 6863i/6865i:
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select SIP Settings.
Configuring Proxy IP and Proxy Port:
4. Select Proxy IP/Port.
5. Enter an IP address or fully qualified host name in the Proxy Server field. Default is 0.0.0.0.
6. Enter a Proxy Port number in the Proxy Port field for accessing the SIP proxy server.
Default is 0.
7. Press Done to save the changes.
Configuring Registrar IP and Registrar Port:
8. Select Registrar IP/Port.
.
.
or
page A-70 "SIP Basic, Per-Line Settings"
Global SIP Settings
on .
page A-79
"SIP
4-72