Mitel 6867i Administrator's Manual page 204

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
4. Select Network > VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
5. In the Basic Settings > VLAN field enable VLAN by pressing the right navigation key.
6. In the LAN Port VLAN > Other Priority field, change the non-IP priority value from 0 to 7
for non-IP packets.
Default for this field is 5.
To set VLAN ID and priority for LAN Port (Port 0):
7. In the LAN Port VLAN > LAN Port VLAN ID field, enter a value from 1 to 4095 to specify
the VLAN ID for the LAN Port. Default is 1.
Note: Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from
1 to 4094 will allow frames from the PC port (containing a VLAN ID) to be untagged
before being forwarded to the LAN port and frames from the LAN port (without a
VLAN ID) to be tagged with the configured VLAN ID before being forwarded to the
PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095
and the PC Port VLAN ID to any ID from 1 to 4094. The following example sets the PC
port to be on VLAN 3 but the LAN port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 4095
• VLAN Settings->PC Port VLAN->PC Port VLAN ID: 3
8. In the LAN Port VLAN > SIP Priority field, enter a value from 0 to 7 to specify the SIP
priority for the LAN Port. Default is 3.
9. In the LAN Port VLAN > RTP Priority field, enter a value from 0 to 7 to specify the RTP
priority for the LAN Port. Default is 5.
10. In the LAN Port VLAN > RTCP Priority field, enter a value from 0 to 7 to specify the RTCP
priority for the LAN Port. Default is 5.
To set VLAN ID and priority for PC Port (Port 1):
11. In the PC Port VLAN > PC Port VLAN ID field, enter a value from 1 to 4095 to specify the
VLAN ID for the LAN Port. Default is 4095.
Note: Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from
1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged
before being forwarded to the PC port and frames from the PC port (without a VLAN
ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and
the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port
to be on VLAN 3 but the PC port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3
4-51