Bluetooth Headset Support; Audio Hi-Q On G.722 Calls; Audio Mode Configuration - Mitel 6867i Administrator's Manual

Notes:
1. For the 6867i and 6869i, if both an analog (non-DHSG) headset and a USB headset
are connected to the phone, the USB headset will take precedence over the analog
headset (i.e. the USB headset will be functional while the analog headset will not
be functional).
2. For the 6867i and 6869i, if both a DHSG headset and a USB headset are connected
to the phone and DHSG is enabled, the DHSG headset will take precedence over
the USB headset.

BLUETOOTH HEADSET SUPPORT

Note: Applicable to the 6873i IP Phone only.
The 6873i supports the use of various Bluetooth headsets as an alternate audio device. Using
the phone UI, you can enable and disable the Bluetooth functionality on your phone as required.
You can also pair, connect, and unpair a Bluetooth headset as applicable.
Note: For more information on Bluetooth headset usage, refer to the 6873i SIP Phone
User Guide.

AUDIO HI-Q ON G.722 CALLS

The Mitel IP phones support the Hi-Q (high quality) audio technology which delivers enhanced
performance and voice clarity for Mitel's 6800 series of SIP phones. Incorporating wideband
audio technology, Mitel Hi-Q significantly improves the audio quality of calls. This technology
provides a more lifelike conversation when the G.722 wideband Codec is used. The 6867i,
6869i, and 6873i IP phones display a large icon when Hi-Q is being used on the call. On the
6863i and 6865i screens, the text of "Hi-Q" displays on the same line as the call timer.

AUDIO MODE CONFIGURATION

The "audio mode" parameter allows you to configure how the handsfree key works. The
following four options are available:
• 0. Speaker - This is the default setting. Calls can be made or received using the handset
or handsfree speakerphone. In handset audio mode, pressing the handsfree button on the
phone switches to handsfree speakerphone. In Speaker audio mode, lift the handset to
switch to the handset.
• 1. Headset - Choose this setting if you want to make or receive all calls using a handset or
headset. For the 6865i, 6867i, 6869i, and 6873i calls can be switched from the handset to
headset by pressing the handsfree button on the phone. To switch from the headset to the
handset, lift the handset.
• 2. Speaker/Headset - Incoming calls are sent to the handsfree speakerphone first when
the handsfree button is pressed. By pressing the handsfree button again, you can switch
back and forth between the handsfree speakerphone and the headset. For the 6865i, 6867i,
Operational Features
5-46