PARAMETER –
sip refer-to from contact
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
UPDATE CALLER ID SETTING
PARAMETER –
sip update callerid
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
When enabled, the phone will check the user name from the contact
header received in 180 response and:
• if the contact header has user name, blind transfer the call to the
user name
or
• if there is no contact header found or the contact header has no
user name, put the remote address of the original INVITE to the
Refer-To header.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
sip refer-to with replaces: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the updating of the Caller ID information during
a call.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
sip update callerid: 1
Advanced Operational Parameters
A-275