Mitel 6867i Administrator's Manual page 127

PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Local SIP TLS Port sip local tls port
Registration Failed sip registration retry
Retry Timer timer
Registration Timeout sip registration timeout
Retry Timer retry timer
Administrator Level Options
DESCRIPTION
Specifies the local source port (SIPS/TLS) from
which the phone sends SIP messages.
Notes:
It is recommended that you avoid the conflict
1.
with any TCP ports being used. For example:
WebUI HTTP server on 80/tcp and HTTPS on
443/tcp.
By default, the IP phones use symmetric TLS
2.
signaling for outgoing TLS SIP messages.
When symmetric TLS is enabled, the IP phone
uses port 5061 as the persistent TLS
connection source port. When symmetric TLS
signaling is disabled, the IP phone chooses a
random persistent TLS connection source port
for TLS messages from the TCP range (i.e.
49152...65535) after each reboot regardless of
whether the parameter "sip outbound support"
is enabled or disabled.
For more information, see Chapter 4,
Source Ports" on page 4-31.
Specifies the time, in seconds, that the phone
waits between registration attempts when a
registration is rejected by the registrar.
For more information, see Chapter 4,
SIP Settings (optional)" on
Specifies the length of time, in seconds, that the
phone waits until it re-attempts to register after a
REGISTER message times out.
If this parameter is set lower than 30 seconds, the
phone uses a minimum timer of 30 seconds.
For more information, see Chapter 4,
SIP Settings (optional)" on
"SIP and TLS
"Advanced
page 4-77.
"Advanced
page 4-77.
3-57