Mitel 6867i Administrator's Manual page 634

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
To specifically enable the Speed Dial 8 service, Administrators must define the "xsi speeddial8
enabled" parameter in the respective configuration file and users must enter in their username
(if required) and password on the phone through the Options > Credentials menu.
For Speed Dial 8 functionality, a Speed Dial 8 key should be configured for easy access to the
Speed Dial 8 menu. Users and Administrators can configure a Speed Dial 8 key using the Web
UI, selecting a desired key, changing the type to "Speeddial" and then entering "xsi.speeddial8"
in the Value field.
Creating a Speed Dial 8 key Key Using the Mitel Web UI
Use the following procedure to create a Speed Dial 8 softkey using the Mitel Web UI:
MITEL WEB UI
1. Click on Operation > Programmable Keys.
or
Click on Operation->Softkeys and XML.
2. Select the key you want to use as a Speed Dial 8 key.
3. In the Type field, select Speeddial to apply to the key.
4. (Optional for the 6867i/6869i/6873i) In the Label field, enter a label to apply to this key.
5. In the Value field, enter "xsi.speeddial8".
6. (Optional) In the Line field, select a line to apply to this key.
7. Click Save Settings.
Administrators also have the added option of configuring a Speed Dial 8 key by defining the
"prgkeyN type", "softkeyN type" or "topsoftkeyN type" parameter as "speeddial" and
"prgkeyN value", "softkeyN value" or "topsoftkeyN value" to "xsi.speeddial8" in the
respective configuration file.
Notes:
1. Speed Dial 8 key Label and Line values are optional.
2. For details on how to configure speeddial keys using the configuration files see
"Programmable Key Settings‚" on page 228, "Softkey Settings‚" on page
"Top Softkey Settings‚" on page 233
6-56
.
218, and