Mitel 6867i Administrator's Manual page 553

Configuring Polling Action URI via the Configuration Files
Use the following parameters to configure the polling Action URI on the IP Phones.
• action uri poll
• action uri poll interval
CONFIGURATION FILES
For the specific parameter you can set in the configuration files, see Appendix A, the section,
"Polling Action URI Settings"
Configuring Polling Action URI via the Mitel Web UI
Use the following procedure to configure polling Action URI using the Mitel Web UI.
MITEL WEB UI
1. Click on Advanced Settings->Action URI.
2. In the "Poll" field, enter a URI to be called every "action uri pool interval" seconds. Enter
the value in a URI format. For example, http://myserver.com/myappli.xml.
3. In the "Interval" field, enter the interval, in seconds, between calls from the phone to the
"action uri poll". The value of "0" is disabled.
4. Click Save Settings to save your changes.
on .
page A-170
Operational Features
5-292