Mitel 6867i Administrator's Manual page 820

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PER-LINE SETTINGS
PARAMETER –
sip lineN dtmf method
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN srtp mode
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-122
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Sets the Dual-tone multifrequency (DTMF) method to use on the IP
phone for a specific line.
Integer
0 (RTP)
0 (RTP)
1 (SIP INFO)
2 (BOTH)
sip line1 dtmf method: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This parameter determines if SRTP is enabled on this line, as
follows:
• If set to -1, then use the global setting for this line. (This is the
default setting.)
• If set to 0, then disable SRTP.
• If set to 1 then SRTP calls are preferred.
• If set to 2, then SRTP calls only are generated/accepted.
Integer
0 (disabled)
-1
0
1
2
sip line1 srtp mode: 1