3. Click on Operation->Programmable Keys.
4. Pick a key to configure for parking a call.
5. In the "Type" field, select Park.
Note: The" Value" and "Line" fields are already configured from the "Park Pickup
Config" field.
6. Pick a key to configure for picking up a call.
7. In the "Type" field, select Pickup.
Note: The" Value" and "Line" fields are already configured from the "Park Pickup
Config" field.
8. Click Save Settings to save your changes.
9. Click on Operation->Reset.
10. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Configuring a Park/Pickup Key Using Mitel Web UI (for the MiCloud Telepo for Service
Providers Call Manager)
Use the following procedure to configure a BLF/Xfer key will call park/pickup functionality using
the Mitel Web UI.
MITEL WEB UI
1. Click on Operation > Programmable Keys
or
Click on Operation > Softkeys and XML > Top Keys
or
Click on Operation > Expansion Module <N>
Operational Features
5-222