Display - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
• Auto (Default)
Note: Setting the Backlight to "Auto" displays an ADVANCED button for you to set
the Auto timer.
6. If you select "Off", press Done to save your setting.
7. If you select "Auto", press the Advanced softkey to set the automatic timer.
8. Using the keypad, enter the amount of seconds you want the phone to stay backlit when
the phone is idle. Valid values are 1 to 36000 seconds. Default is 600 seconds (equals 10
minutes). When this period of time is reached, the phone turns OFF the backlight. Use the
"Backspace" and/or "Clear" softkeys to delete entries if required.
9. Press Done to save your setting. The setting applies immediately to the phone.

DISPLAY

Note: Applicable to the 6867i, 6869i, and 6873i IP Phones only.
The Display option on the 6867i, 6869i, and 6873i IP phones allows you to set the following
on your phone:
• Brightness Level
• Brightness Timer
BRIGHTNESS LEVEL
The "Brightness Level" option allows you to set the amount of light that illuminates the LCD
display. Use this option to set your preference of brightness.
SETTING BRIGHTNESS
For the 6867i/6869i:
IP PHONE UI
1. Press
2. Navigate to the Display option and press the
3. Press the 2 key to navigate to the Brightness Level setting.
4. Use the3 and 4 navigation buttons to increase or decrease the intensity of brightness on
the LCD.
5. Press the Save softkey to save your changes.
5-33
to enter the Options List.
button or Select softkey.