Mitel 6867i Administrator's Manual page 663

Use the following procedure to manually update the firmware on your phone from the specified
configuration server.
MITEL WEB UI
1. Click on Advanced Settings->Firmware Update.
2. In the "File Name" field, enter the firmware file name (<phone model>.st) that you want to
download to your IP phone. For example, 6867i.st (for a 6867i phone).
Note: This file name must match the actual name of the firmware file residing on
your configuration server.
The phones use the following naming convention for the .st files. See the following table.
IP PHONE MODEL
6863i
6865i
6867i
6869i
6873i
3. In the "Download Protocol" field, select the protocol from the list to use for downloading
the new firmware. Valid values are:
• TFTP
• FTP
• HTTP
• HTTPS
4. In the "Server" field, enter the IP address in dotted decimal format, of the TFTP configuration
server, or the domain name of the FTP, HTTP, or HTTPS configuration servers (dependent
on the protocol you selected in step 3.) For example: 432.221.45.6.
5. In the "Path" field, enter the path location on the protocol server for where the new firmware
resides. For example, C:\mitel\configserver\firmwareupgrade.
ASSOCIATED FIRMWARE
6863i.st
6865i.st
6867i.st
6869i.st
6873i.st
Upgrading the Firmware
8-4