•
7: The behavior is determined by the global parameter "play a ring splash".
•
If "play a ring splash" is defined as 0 then the feature is disabled.
•
If "play a ring splash" is defined as 1 then the behavior is the same as Normal.
•
If "play a ring splash" is defined as 2 then the behavior is the same as Normal but
the ring splash plays when idle and also during the active call state.
•
8: In call delayed (same as Normal delayed but ring splash plays when idle and also during
the active call state [use the "ring splash delay" parameter to define the delay]).
•
9: In call periodic (same as Periodic but ring splash plays when idle and also during the
active call state [use the "ring splash frequency" parameter to define the frequency
interval).
•
10: In call periodic delayed (same as Periodic delayed but ring splash plays when idle and
also during the active call state [use the "ring splash frequency" parameter to define the
frequency interval and the "ring splash delay" parameter to define the delay]).
•
11: In call low volume (same as Low volume but ring splash plays when idle and also during
the active call state).
•
12: In call low volume delayed (same as Low volume delayed but ring splash plays when
idle and also during the active call state [use the "ring splash delay" parameter to define
the delay]).
The following parameters are available allowing administrators to set and pass the control of
the ring splash to the key (instead of the phone using the global "play a ring splash" parameter).
•
"prgkeyN ring splash"
•
"softkeyN ring splash"
•
"topsoftkeyN ring splash"
•
"expmodX KeyN ring splash
•
"hardkeyN ring splash"
•
"ring splash delay" (applicable when the "...keyN ring splash" parameter is set to a "de-
layed" alerting pattern)
•
"ring splash volume" (applicable when the "...keyN ring splash" parameter is set to a "low
volume" alerting pattern)
•
"ring splash frequency" (applicable when the "...keyN ring splash" parameter is set to a
"periodic" alerting pattern)
The per key settings overwrite the global setting ("play a ring splash" parameter) on the phone.
If the global parameter is disabled, a ring splash can still be enabled on a key basis. If the global
parameter is enabled, all keys will have a ring splash unless the value "0" is configured explicitly
for a key.
Operational Features
5-174