Mitel 6867i Administrator's Manual page 352

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
MITEL WEB UI
1. Click on Basic Settings->Preferences->General.
2. Enable or disable the "Goodbye Key Cancels Incoming Call" field by checking or un-
checking the check box.
3. Click Save Settings to save your changes.
CONFIGURABLE STATUS CODE ON IGNORING INCOMING CALLS
Note: Valid status codes are based on RFC3261.
When a user presses the "Ignore" key on the phones during an incoming call, the phone rejects
the incoming call with a status code of "486 Busy Here". The IP phones allow an administrator
to configure this status code. You can configure the status code using the configuration files only.
Use the following parameter to configure a status code when ignoring incoming calls:
• sip ignore status code
Configuring Status Codes on Ignoring Incoming Calls
You can use the following procedure to set the status code sent in the response when a user
presses the "Ignore" key.
5-91