Mitel 6867i Administrator's Manual page 998

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
TROUBLESHOOTING PARAMETERS
The following parameters in this section allow the system administrator to set logging and
support settings for troubleshooting purposes.
Note: Enabling the syslog module and configuring debug levels should only be used for
support purposes. Mitel recommends Administrators leave the debug level at its default
for normal production use. Enabling all the debug levels on the phone may impact
performance and normal operation of the phone.
LOG SETTINGS
PARAMETER –
log server ip
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
log server port
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-300
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the IP address of the log server to which log information will
be transmitted.
IP address
0.0.0.0
N/A
log server ip: 192.168.3.2
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the IP port of the log server. This is the IP port that
transmits information from the IP phone to the IP address location.
Integer
0
Any valid IP port
log server port: 2