Mitel 6867i Administrator's Manual page 667

ENABLING AUTO-RESYNC USING THE CONFIGURATION FILES
Use the following procedure to configure automatic updates of the IP phone firmware,
configuration files, or both.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for automatic update, see Appendix
A, the section, "Configuration Server Settings"
Notes:
1. If a user is accessing the Mitel Web UI, they are not informed of an auto-reboot.
2. Any changes made using the Mitel Web UI or the IP phone UI are not overwritten
by an auto-resync update. Auto-resync affects the configuration files only. However,
the settings in the Mitel Web UI take precedence over the IP phone UI and the
configuration files.
3. If the IP phone is in use (not idle) at the time of the resync check, the reboot occurs
when the phone becomes idle.
4. The resync time is based on the local time of the IP phone.
5. The automatic update feature works with both encrypted and plain text configuration
files.
ENABLING AUTO-RESYNC USING THE MITEL WEB UI
Use the following procedure to enable auto-resync for the phones in your network.
MITEL WEB UI
1. Click on Advanced Settings->Configuration Server->Auto-Resync.
2. In the "Mode" field, select the auto-resync mode you want to use to automatically update
the phone.
Valid values are:
• None Disable auto-resync
• Configuration Files Updates the configuration files on the IP phone automatically at
the specified time if the files on the server have changed.
• Firmware Updates the firmware on the IP phone automatically at the specified time if
the files on the server have changed.
Upgrading the Firmware
on page A-20.
8-8