PARK AND PICKUP SETTINGS
PARAMETER –
sip park pickup config (global)
sip lineN park pickup config
(per line)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the code to enter before entering the extension for where
you want to park an incoming call. The applicable value is dependent
on the type of server in the network:
Server/Park & Pickup Values*
Asterisk 70;70;asterisk
Sylantro *98;*99;sylantro
BroadWorks *68;*88;broadworks
ININ PBX callpark;pickup;inin
*Leave "value" fields blank to disable the park and pickup feature.
For BroadSoft BroadWorks the following syntax is applicable:
<park_code>,<park_dial_code>;<pickup_code>,
<pickup_dial_code>;broadworks
Note: Pauses can be introduced in the park and pick up dial
codes by adding commas. Each comma amounts to
approximate 500ms.
Alphanumeric characters
<Blank>
See applicable values in table above.
sip lineN park pickup config: *68;*88;broadworks
or
sip park pickup config: *68,,,,,,,42;*88,,,,,,,42;broadworks
A-215