Rtcp Summary Reports - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
• None
• G.722
• G.711u/8K
• G.711u/16K
• G.711a/8K
• G.711a/16K
• G.729
• G.726-16
• G.726-24
• G.726-32
• G.726-40
• L16 (8K)
• L16 (16K)
• AMR (Licensed feature)
• AMR-WB (G.722.2) (Licensed feature)
• G.722.1
Note: You can select up to 9 codecs in addition to the codec you selected in step 7.
9. In the "Packetization Interval" field, select the time, in milliseconds. Valid values are 5 to
90, in increments of 5 milliseconds.
10. The "Silence Suppression" field is enabled by default. Disable this field by unchecking
the check box.
When enabled, the phone negotiates whether or not to use silence suppression. Disabling
this feature forces the phone to ignore any negotiated value.
11. Click Save Settings to save your changes.

RTCP SUMMARY REPORTS

The IP phones include the capability of enabling/disabling the generation of RTCP summary
reports using the SIP vq-rtcpxr event package. These RTCP summary reports include voice
quality statistics according to draft-ietf-sipping-rtcp-summary-05 specifications including packet
loss, jitter, and delay statistics, as well as call quality scores. When this feature is enabled, an
RTCP summary report is sent at the end of each call via a PUBLISH message to the configured
server (known as the collector).
In addition to enabling/disabling the generation of these reports, you must specify the hostname
and port of the collector receiving the reports. Similar to the other IP Phone SIP account
parameters, the RTCP summary report parameters can be set on a global or a per-line basis
using the configuration files only.
The RTCP summary report parameters are:
• sip rtcp summary reports
4-95