Mitel 6867i Administrator's Manual page 203

• RTP Priority
• RTCP Priority
17. Enter a VLAN priority value from 0 to 7 for the associated Protocol. Default values for each
Protocol are:
• SIP Priority = 3
• RTP Priority = 5
• RTCP Priority = 5
18. Press Done (2 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for PC Port (Port 1):
19. Select PC Port VLAN.
20. Select PC Port VLAN ID and enter a value from 1 to 4095 to specify the VLAN ID for the
PC Port.
Default is 4095.
Note: Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from
1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged
before being forwarded to the PC port and frames from the PC port (without a VLAN
ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.
Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and
the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port
to be on VLAN 3 but the PC port is configured as untagged.
• VLAN Settings->VLAN: Enable
• VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3
• VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
21. Press Enter or Set to save the change.
22. Select PC Port Priority.
23. Select a PC Port VLAN priority value from 0 to 7 for the PC Port.
Default is 0.
24. Press Done to save the changes.
25. Navigate back to the Options List menu.
26. Select Restart Phone and follow the prompts to restart the phone and apply the configu-
ration changes.
For the 6867i/6869i:
IP PHONE UI
1. Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
Network Settings
4-50