Softkey Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

SOFTKEY SETTINGS

The value of "N" for the following parameters is dependent on the number of softkeys available
on the 6867i, 6869i, and 6873i models. See the table above for applicable values. Available
softkey types are dependent on the IP phone model. Please refer to the respective model's
User Guide for the model's available softkey types.
Note: Applicable to the 6867i, 6869i, and 6873i IP Phone only.
PARAMETER –
softkeyN type
DESCRIPTION
A-218
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The type of softkey to configure. Valid types are:
• none - Indicates key is disabled.
• speeddial - Indicates key is configured for speeddial use.
Speeddial is applicable to the M680i and M685i also. You can
configure a key to speeddial a specific number by pressing that
key. Optionally, you can also configure a Speeddial key to dial
prefix numbers. With this option, the prefix numbers automatically
dial when you press the key, and the phone waits for you to enter
the remaining numbers to dial out.
Note: When there is an active call, the Speeddial keys send
DTMF digits through the active voice path. To dial out, you have
to first put the active call on hold and then press the Speeddial
key.
• dnd - Indicates key is configured for do not disturb on the phone.
This option is "Do Not Disturb" in the Mitel Web UI). You must
also set the DND key mode (see
and "DND Key Mode Settings"
• xml - Indicates the key is configured to accept an XML application
for accessing customized XML services. You can also specify an
XML key URL for this option.
• flash - Indicates the key is set to generate a flash event when it is
pressed. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when
the call is not on hold).
• spre - Indicates the key is configured to automatically activate
specific services offered by the server. For example, if the spre
value of *82 is configured, then by pressing the key, *82
automatically activates a service provided by the server.
• park - Indicates the key is configured to park incoming calls when
pressed.
• pickup - Indicates the key is configured to pick up parked calls
when pressed.
• lcr - Indicates the key is configured for "last call return" when
pressed.
• callforward - Indicates the key is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode
must be enabled to use this key. "Account" mode is the default.
• speeddialxfer - Indicates the key is configured to transfer calls
AND configured for speeddialing to a specific number.
"DND Key Mode" on page 5-94
on page A-181 for details).