Mitel 6867i Administrator's Manual page 361

PARAMETER
LLDP Packet Interval
CONFIGURING LLDP-MED AND ELIN
Use the following procedures to configure LLDP-MED and ELIN on the IP phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"LLDP-MED and ELIN Settings"
Use the following procedure to enable/disable LLDP-MED using the IP Phone UI.
Note: You cannot configure the "LLDP Interval" or the "Use LLDP ELIN" parameters
via the IP Phone UI.
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select Network Settings.
4. Select Ethernet & VLAN.
5. Select LLDP Support.
6. Press CHANGE to toggle the LLDP setting to Enabled or Disabled.
This field enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
7. Press DONE to save the change.
For the 6867i/6869i:
1. Press to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Network > LLDP.
This option enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
5. Use the 5 and 2 keys enable or disable the feature.
6. Press the Save softkey.
For the 6873i:
METHOD OF CONFIGURATION
Mitel Web UI
on .
page A-159
Operational Features
WHO CAN CONFIGURE
Administrator
5-100