Mitel 6867i Administrator's Manual page 965

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
• 11: In call low volume (same as Low volume but ring splash plays
when idle and also during the active call state).
• 12: In call low volume delayed (same as Low volume delayed but
ring splash plays when idle and also during the active call state
[use the "ring splash delay" parameter to define the delay]).
Notes:
• Ring tones are based on the current ring tone set configured on
the IP phone.
• Ring splashes will not be played if a custom ring tone is selected.
Integer
N/A
0 (Silence)
1 (Normal)
2 (Normal delayed)
3 (Periodic)
4 (Periodic delayed)
5 (Low volume)
6 (Low volume delayed)
7 (The behavior is determined by the global parameter "play a ring
splash".
• If "play a ring splash" is defined as 0 then the feature is
disabled.
• If "play a ring splash" is defined as 1 then the behavior is the
same as Normal.
• If "play a ring splash" is defined as 2 then the behavior is the
same as Normal but the ring splash plays when idle and also
during the active call state).
8 (In call delayed)
9 (In call periodic)
10 (In call periodic delayed)
11 (In call low volume)
12 (In call low volume delayed)
expmod1 key1 ring splash: 1
A-267