Mitel 6867i Administrator's Manual page 129

PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
ACD Subscription sip acd subscription
Period period
BLA Subscription sip bla subscription
Period period
Blacklist Duration sip blacklist duration
Whitelist Proxy sip whitelist
Administrator Level Options
DESCRIPTION
Specifies the time period, in seconds, that the IP
phone re-subscribes the Automatic Call
Distribution (ACD) subscription service after a
software/firmware upgrade or after a reboot of the
IP phone.
For more information, see Chapter 4,
SIP Settings (optional)" on
Specifies the amount of time, in seconds, that the
phone waits to receive a BLA subscribe message
from the server. If you specify zero (0), the phone
uses the value specified for the BLA expiration in
the subscribe message received from the server. If
no value is specified, the phone uses the default
value of 300 seconds.
For more information, see Chapter 4,
SIP Settings (optional)" on
Specifies the length of time, in seconds, that a
failed server remains on the server blacklist. The IP
phone avoids sending a SIP message to a failed
server (if another server is available) for this
amount of time.
For more information about Blacklist Duration, see
Chapter 6, the section, "Blacklist Duration"
page 6-16.
This parameter enables/disables the whitelist
proxy feature, as follows:
• Set to 0 to disable the feature.
• Set to 1 to enable the feature. When this feature
is enabled, an IP phone accepts call requests
from a trusted proxy server only. The IP phone
rejects any call requests from an untrusted
proxy server.
For more information about Whitelist Proxy see
Chapter 6, the section, "Whitelist Proxy"
page 6-18.
"Advanced
page 4-77.
"Advanced
page 4-77.
on
on
3-59