Hard Key Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

HARD KEY SETTINGS

PARAMETER –
hardkeyN type
DESCRIPTION
A-246
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The type of key to which you would like to change the hard key. Valid
types include:
• none - Indicates no setting for the key.
• line - Indicates the key is configured for line use.
• speeddial - Indicates the key is configured for speeddial use. You
can configure a key to speeddial a specific number by pressing
that key. Optionally, you can also configure a Speeddial key to dial
prefix numbers. With this option, the prefix numbers automatically
dial when you press the key, and the phone waits for you to enter
the remaining numbers to dial.
Note: When there is an active call, the Speeddial keys send
DTMF digits through the active voice path. To dial out, you have
to first put the active call on hold and then press the Speeddial
key.
• dnd - Indicates the key is configured for Do Not Disturb on the
phone.
• blf - Indicates the key is configured for Busy Lamp Field (BLF)
use.
• list - Indicates the key is configured for BLF/List use.
• acd - (for Sylantro/BroadWorks servers only) Indicates the key is
configured for Auto Call Distribution (called "Auto Call
Distribution" in the Mitel Web UI). The ACD feature allows the
Sylantro/BroadWorks server to distribute calls from a queue to
registered IP phone users (agents).
• xml - Indicates the key is configured to accept an XML application
for accessing customized XML services. You can also specify an
XML softkey URL for this option.
• flash - Indicates the key is set to generate a flash event when it is
pressed. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when
the call is not on hold).
• spre - Indicates the key is configured to automatically activate
specific services offered by the server. For example, if the spre
value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates the key is configured to park incoming calls when
pressed.
• pickup - Indicates the key is configured to pick up parked calls
when pressed.
• lcr - Indicates the key is configured for the Last Call Return
function when pressed.
• callforward - Indicates the key is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode
must be enabled to use this key. "Account" mode is the default.
• blfxfer - Indicates the key is configured to transfer calls AND
configured for BLF on a single key.