Configuring Ring Tones And Tone Sets - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

CONFIGURING RING TONES AND TONE SETS

Use the following procedures to configure ring tones and tone sets on the IP phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for ring tones, see Appendix A,
the section,
"Ring Tone and Tone Set Global Settings"
on .
page A-173
IP PHONE UI
For global configuration only:
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Tones.
4. Select Set Ring Tone.
5. Select the type of ring tone (Tone 1 through Tone 15, Silent, or a custom ring tone if
available).
6. Press Done to save the change.
7. Select Tone Set.
8. Select the country for which you want to apply the tone set.
Valid values are Australia, Brazil, Canada, Europe, France, Germany, Italy, Italy2, Ma-
laysia, Mexico, Brazil, Russia, Slovakia, UK, and US. Default is US.
9. Press Done to save the change.
The ring tone and tone set you select is immediately applied to the IP phone.
For the 6867i/6869i:
1. Press
2. Navigate to the Audio > Ring Tones option and press the
3. Use the 5 and 2 keys to scroll through and choose the desired ring tone (Tone 1 through
Tone 15, Silent, or a custom ring tone if available).
4. Press the Save softkey to save your changes.
5. Navigate to the Audio > Tone Sets option and press the
6. Use the 5 and 2 keys to scroll through and choose the desired tone set.
Valid values are Australia, Brazil, Canada, Europe, France, Germany, Italy, Italy2, Ma-
laysia, Mexico, Brazil, Russia, Slovakia, UK, and US. Default is US.
7. Press the Save softkey to save your changes.
5-121
to enter the Options List.
on or
page A-171 "Ring Tone Per-Line Settings"
button or Select softkey.
button or Select softkey.