Mitel 6867i Administrator's Manual page 393

How this Feature Works when Directed Call Pickup is Disabled with BLF or BLF/List
1. Phone A monitors Phone B via BLF/List.
2. Phone C calls Phone B; Phone B rings
3. If you press the BLF/List softkey on Phone A, it performs a speeddial to Phone B.
4. Phone C and Phone A are ringing Phone B on separate lines (if available).
Notes:
1. The default method for the phone to use is Directed Call Pickup over BLF if the
server provides applicable information. If the Directed Call Pickup over BLF
information is missing in the messages to the server, the Directed Call Pickup by
Prefix method is used if a value for the prefix code exists in the configuration.
2. You can define only one prefix, which will be applicable to all BLF- or
BLF/List-monitored extensions.
3. The phone that picks up displays the prefix code + the extension number (for
example, *981234 where prefix key = *98, extension = 1234).
You can enable/disable "Directed Call Pickup" using the configuration files or the Mitel Web UI.
Note: The "Directed Call Pickup" feature is disabled by default.
ENABLING/DISABLING DIRECTED CALL PICKUP
Use the following procedure to enable or disable the Directed Call Pickup feature on the IP
phone.
CONFIGURATION FILES
To enable/disable Directed Call Pickup on the IP phone using the configuration files, see
Appendix A, the section,
MITEL WEB UI
1. Click on Basic Settings->Preferences->Directed Call Pickup Settings.
2. Enable the "Directed Call Pickup" field by checking the check box.
(Disable this field by unchecking the box). Default is disabled.)
3. (Optional) Enter a prefix in the "Directed Call Pickup Prefix" field. For example, *98.
This prefix is appended to the beginning of the Directed Call Pickup number when dialed
from the BLF or BLF/List softkey.
"Directed Call Pickup (BLF or XML Call Interception) Settings"
Operational Features
on .
page A-210
5-132