Mitel 6867i Administrator's Manual page 1013

# General SIP Settings
# = = = = = = = = = = =
#sip session timer: 90
#sip transport protocol: 0
#sip use basic codecs: 1
#sip out-of-band dtmf: 0
# Global SIP User Settings
# ==========================
#
# Notes:
# These settings are used as the default configuration for the hard
# key lines on the phone.
#
# L1 to L2 on the 6800 Series IP phones
#
# These can be over-ridden on a per-line basis using the per-line
# settings.
#
# See the Admin Guide for a detailed explanation of how this works
sip screen name: Joe Smith
sip user name: 4256
sip display name: Joseph Smith # the caller name sent out when making
sip vmail: *78
sip auth name: jsmith
sip password: 12345
sip mode: 0
sip proxy ip: proxy.mitel.com # IP address or FQDN of proxy
sip proxy port: 5060
sip registrar ip: mitel.com
sip registrar port: 0
sip registration period: 3600
# enable support of RFC4028, the default
# value of 0 disables this functionality
# use UDP (1), TCP (2) or both (0) for sip
# messaging
# limit codecs to G711 and G729
# turn off support for RFC2833 (on by
# default)
That is:
# the name display on the phone's screen
# the phone number
# a call.
# the number to reach voicemail on
# account used to authenticate user
# password for authentication account
# line type:
# 0 - generic,
# 1 - BroadSoft SCA line
# 2 - Reserved
# port used for SIP messages on the
# proxy. Set to 0 to enable SRV
# lookups
# IP address or FQDN of registrar
# as proxy port, but for the registrar
# registration period in seconds
Sample Configuration Files
C-7