Custom Time Zone And Dst Settings - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
time server3
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

CUSTOM TIME ZONE AND DST SETTINGS

Note: To use the parameters in this section, the "time zone name" parameter must be
set to "Custom". See
PARAMETER –
time zone minutes
DESCRIPTION
FORMAT
DEFAULT VALUE
A-52
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The tertiary time server's IP address or qualified domain name. If the
time server is enabled, and the primary and secondary time servers
are not configured or cannot be accessed the value for time server3
will be used to request the time.
For DHCP to automatically populate this parameter, your DHCP
server must support Option 42.
IP address or qualified domain name
3.mitel.pool.ntp.org
N/A
time server3: 192.168.0.5
page A-45 for more information.
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The number of minutes the timezone is offset from UTC
(Coordinated Universal Time). This can be positive (West of the
Prime Meridian) or negative (East of the Prim Meridian). Eastern
Standard Time (EST) has a value of 300 which is the default.
Integer
300