Background Image On Idle Screen - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
CONFIGURING THE BRIGHTNESS LEVEL SETTINGS USING THE CONFI-
GURATION FILES
Use the following information to configure the brightness level settings on the 6867i, 6869i, and
6873i.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the sections,
"Backlight Mode Settings"

BACKGROUND IMAGE ON IDLE SCREEN

Note: Applicable to the 6867i, 6869i, and 6873i IP Phones only.
Administrators can brand the idle screen of the 6867i, 6869i, and 6873i IP phones with their
own company logo or image. The background image is displayed on the bottom layer of the
idle screen. This image can be set by the "background image" parameter. Current text (i.e.
screen name, extension, and date/time) and softkeys on the idle screen are displayed on top
of the background image. The background image can be downloaded from your configuration
server using either tftp, ftp, http, and https protocols.
IDLE SCREEN IMAGE REQUIREMENTS:
• 320x240 pixels (6867i)
• 480x272 pixels (6869i)
• 800x480 pixels (6873i)
• 24 or 32-bit color depth
• 1MB maximum file size
• Both .jpg and .png files are supported (.jpg strongly recommended due to smaller file size
and faster loading time)
• There should be no frame around the image
CONFIGURING A BACKGROUND IMAGE ON THE IDLE SCREEN
Use the following procedures to configure a background image on the idle screen
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Background Image on Idle Screen"
5-35
on and
page A-60 "Brightness Level Settings"
on .
page A-62
on .
page A-61