Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PICTURE ID FEATURE
Note: Applicable to the 6867i, 6869i, and 6873i IP Phones only.
PARAMETER –
image server uri
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-64
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to specify the server URI where pictures are stored for
display to the phone during incoming and outgoing calls, and in the
Directory, Received Callers List, and Outgoing Redial List entries.
The pictures are dynamically retrieved from the centralized server for
each call and then locally cached in the phone to reduce network
traffic.
If there is no picture on the central server for the dialed number
and/or Caller Id number, and Directory, Received Callers List, and/or
Outgoing Redial List entry, the generic blue figure image is shown.
Pictures must be in ".png" format and 150 pixels wide x 150 pixels
tall. For the 6867i/6869i/6873i, the png can be 24-bit or 32-bit. The
filenames for pictures must be stored using the phone number as the
filename (for example, 9995551234.png).
Notes:
• Entering no value for this parameter disables this feature.
• The "image server uri" parameter supports TFTP, FTP, HTTP,
and HTTPS.
• The resolution specification for Picture IDs in releases previous to
Release 4.2.0 was 150x200 pixels. Picture IDs in this resolution
can still be used, but will not be optimally displayed on-screen due
to the UI redesign implemented in Release 4.2.0. To align with the
new UI implemented in Release 4.2.0, ensure the resolution of
your Picture IDs are 150x150 pixels.
Server URI String
N/A
N/A
image server uri: tftp://192.168.1.100