Show Environment - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Do you want to disable AAA function to let the system do the local authentication?
(y/n) [n] y
Switch(reset-config)#

2-12 show environment

This command is used to display fan, temperature, power availability and status information.
show environment [fan | power | temperature]
Parameters
fan
power
temperature
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If a specific type is not specified, all types of environment information will be displayed.
Example
This example shows how to display fan, temperature, power availability and status information.
Switch# show environment
Detail Temperature Status:
Unit Temperature Descr/ID
----- ------------------------------------------------------
1 Central Temperature/1
Status code: * temperature is out of threshold range
Detail Fan Status:
--------------------------------------------------------------
Unit 1:
Fan 1 (OK)
Detail Power Status:
Unit Power Module
----- ----------------
1 Internal Power
1 External Power
(Optional) Specifies to display the switch fan detailed status.
(Optional) Specifies to display the switch power detailed status.
(Optional) Specifies to display the switch temperature detailed status.
Fan 2 (OK) Fan 3 (OK)
Power Status
-------------
in-operation
empty
24
Current/Threshold Range
25C/11~79C