Show Ip Dhcp Snooping Binding - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ip dhcp snooping binding

show ip dhcp snooping binding [IP-ADDRESS] [MAC-ADDRESS] [vlan VLAN-ID] [interface
[INTERFACE-ID [, | -]]]
Syntax Description
IP-ADDRESS
MAC-ADDRESS
vlan VLAN-ID
interface
INTERFACE-ID
,
-
Default
Command Mode
Usage Guideline
Example
Switch# show ip dhcp snooping binding
Mac Address
Interface
----------------- --------------- -------------
-----
00-01-02-03-04-05 10.1.1.10
eth3.5
00-01-02-00-00-05 10.1.1.1
eth3.5
Total Entries: 2
Switch#
CLI Reference Guide
Use the command to display DHCP snooping binding entries.
(Optional) Display the binding entry based on IP address.
(Optional) Display the binding entry based on MAC address.
(Optional) Display the binding entry based on VLAN.
(Optional) Display the binding entry based on port ID.
(Optional) Specifies a series of interfaces, or separates a range of interfaces
from a previous range. No space before and after the comma.
(Optional) Specifies a range of interfaces. No space before and after the hyphen.
Not applicable
EXEC mode or any configuration mode
Use the command to display DHCP snooping configuration binding entries.
This example shows how to display DHCP display DHCP snooping binding
entries:
IP Address Lease(seconds)
-------------- ------ ----
1500 dhcp-snooping
1495 dhcp-snooping
show ip dhcp snooping binding
Type VLAN
100
100
792