Display Local-Server Statistics - 3Com 5500G-EI Command Reference Manual

display local-server
statistics
undo data-flow format
View
RADIUS Scheme View
Parameter
Set data unit.
data:
Set 'byte' as the unit of data flow.
byte:
Set 'giga-byte' as the unit of data flow.
giga-byte:
Set 'kilo-byte' as the unit of data flow.
kilo-byte:
Set 'mega-byte' as the unit of data flow.
mega-byte:
Set data packet unit.
packet:
Set 'giga-packet' as the unit of packet flow.
giga-packet:
Set 'kilo-packet' as the unit of packet flow.
kilo-packet:
Set 'mega-packet' as the unit of packet flow.
mega-packet:
Set 'one-packet' as the unit of packet flow.
one-packet:
Description
Use the
■ data-flow-format
is sent to the RADIUS Server.
Use the
■ undo data-flow format
setting.
By default, the data unit is byte and the data packet unit is one-packet.
Related command:
display radius
Example
To set the unit of data flow that is sent to kilo-byte and the data packet to
kilo-packet, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]radius scheme 3Com
New Radius scheme
[SW5500-radius-3Com]data-flow-format data kilo-byte packet
kilo-packet
Syntax

display local-server statistics

View
All views
RADIUS Protocol Configuration Commands
command to configure the unit of data flow that
command to restore the unit to the default
.
375