Display Qos-Interface Traffic-Redirect - 3Com 5500G-EI Command Reference Manual

294 C 8: U Q
HAPTER SING
display qos-interface
traffic-redirect
display qos-interface
traffic-statistic
S/ACL C
O OMMANDS
This command is used for displaying the traffic priority settings. The information
displayed includes the ACL corresponding to the traffic tagged with priority,
priority type and value.
Related command:
Example
Display the traffic priority settings.
<SW5500>display qos-interface GigabitEthernet1/0/1 traffic-priority
GigabitEthernet1/0/1: traffic-priority
Inbound:
Matches: Acl 2000 rule 1 running
Priority action: cos best-effort
Syntax
display qos-interface {
interface-num | unit-id
View
Any view
Parameter
interface-name | interface-type interface-num:
for more information, refer to the
: Unit ID of the Switch.
unit-id
Description
Use the

display qos-interface traffic-redirect

settings of the redirection parameters. The displayed content includes the
corresponding ACLs of the traffic to be redirected, the redirected interfaces, and
so on.
Related conmmand:
Example
Display the redirection parameter configuration.
<SW5500>display qos-interface gigabitethernet1/0/1 traffic-redirect
GigabitEthernet1/0/1: traffic-redirect
Inbound:
Matches: Acl 2000 rule 1 running
Redirected to: interface GigabitEthernet1/0/2
Syntax
display qos-interface {
interface-num | unit-id
View
All views
.
traffic-priority
interface-name | interface-type
} traffic-redirect
command in this manual.
port
.
traffic-redirect
interface-name | interface-type
} traffic-statistic
Interface of the Switch,
command to view the