Reset Physical Layer Statistics; Rst: Reset Phys Layer Counters - 3Com CoreBuilder 9000 User Manual

208 C 8: V
HAPTER IEWING
Reset Physical Layer
Statistics
S
TATISTICS
Reset physical layer statistics for a specified port.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 1 2 1.1.1
The following message is displayed:
Reset physical counters completed successfully.
The physical statistics are reset for port 1.1.1.
(1) PHY: Physical Layer

(2) RST: Reset phys layer counters

Format or Range
<slot.group.port>
or Enter 0.0 - For all ports
4 1 2 [parameters]
Physical statistics for the switch are reset.
Reset physical counters completed
successfully.