Table of Contents
Advertisement
Custom Functions for Smart Functions menu
From the Configure Smart Functions dialog box, you can add, delete, and modify custom
functions on the Smart Functions menu.
To add a custom function
1
Click New.
2
In the Name box, enter the name you want to appear on the Smart Functions menu.
3
In the Command box, enter the pathname and file name of the function you want to add.
Note: If you do not know the pathname or file name of the function, click
Browse beside the Command box. You can then navigate to the correct
file, select it, and click Open.
4
In the Arguments box, enter any arguments that are required for this function.
Note: If you want the IP Softphone 2050 to prompt you for the argument
when you select this special function, select Prompt for arguments.
5
In the Initial directory box, enter the pathname of the directory you want this function to use.
Note: As with the Command box in step 3, if you are unsure of the
pathname or filename, click Browse next to the Initial directory box. You
can then navigate to the correct directory, make your selection, and click
OK to finish.
6
To change the icon that appears beside this function on the Smart Functions menu, click
Change, then go through steps 7 to 9. If you do not want to change the icon, go to step 10.
7
Click Browse.
8
Navigate to the file you entered in the Command box and select it.
9
Click Open.
10 Select one of the icons that appears.
11 Click OK.
12 To add the new function to the Smart Functions menu, click OK.
To modify a custom function
1
Select the custom function you want to modify.
2
Click Modify.
3
Make the required changes.
All manuals and user guides at all-guides.com
Chapter 6 IP Softphone 2050 USB Headset Adapter
IP Softphone 2050 User Guide
39
Advertisement
Table of Contents
