Ci: Signal Source For Speed Controller Actual Value 2; Ci: Signal Source For Speed Controller Setpoint / N_Ctr Set Sig S; Ci: Signal Source For Speed Controller Actual Value Smoothing; Ci: Derivative-Action Element Signal Source / D Elem Sig S - Siemens SINAMICS DCM List Manual

Dependency: Refer to: p50621, p50622, p50624, r52165
Note: The setpoint/actual value difference (r52165) results from setpoint 1 and 2 (p50621, p50622) and actual value 1 and
2 (p50623, p50624).
p50624 CI: Signal source for speed controller actual value 2 / n_ctr act 2 sig s
DC_CTRL Can be changed: T
Data type: Unsigned32 / FloatingPoint32
P-Group: -
Not for motor type: -
Min
-
Description: Sets the signal source for actual value 2 on the speed controller.
Dependency: Refer to: p50621, p50622, p50623, r52165
Note: The setpoint/actual value difference (r52165) results from setpoint 1 and 2 (p50621, p50622) and actual value 1 and
2 (p50623, p50624).
p50625[0...n]

CI: Signal source for speed controller setpoint / n_ctr set sig s

DC_CTRL Can be changed: T
Data type: Unsigned32 / FloatingPoint32
P-Group: -
Not for motor type: -
Min
-
Description: Sets the signal source for the setpoint on the speed controller.
This signal can be smoothed using p50228.
Dependency: Refer to: p50228
p50626[0...n] CI: Signal source for speed controller actual value smoothing / Act v smoo sig s
DC_CTRL Can be changed: T
Data type: Unsigned32 / FloatingPoint32
P-Group: -
Not for motor type: -
Min
-
Description: Sets the signal source to enable smoothing of the actual value on the speed controller.
p50627

CI: Derivative-action element signal source / D elem sig s

DC_CTRL Can be changed: T
Data type: Unsigned32 / FloatingPoint32
P-Group: -
Not for motor type: -
Min
-
Description: Sets the signal source for the derivative-action element.
Dependency: Refer to: p50205, p50206, r52168, r52169
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
-
Calculated: -
Dyn. index: CDS, p0170
Unit group: -
Scaling: PERCENT
Max
-
Calculated: -
Dyn. index: CDS, p0170
Unit group: -
Scaling: PERCENT
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: 6810
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: 6810
Unit selection: -
Expert list: 1
Factory setting
52170[0]
Access level: 3
Func. diagram: 6810
Unit selection: -
Expert list: 1
Factory setting
52167[0]
Access level: 3
Func. diagram: 6810
Unit selection: -
Expert list: 1
Factory setting
52178[0]
489