Trace Control / Trace Control; Measuring Function Control / Meas Fct Ctrl; Trace Options / Trace Options; Trace Status / Trace Status - Siemens SINAMICS DCM List Manual

2 Parameters
2.2 List of parameters
p4700[0...1]

Trace control / Trace control

CU_DC, CU_DC_R, Can be changed: U, T
CU_DC_R_S,
Data type: Integer16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Setting to control the trace function.
Value: 0:
1:
2:
Index: [0] = Trace 0
[1] = Trace 1
p4701

Measuring function control / Meas fct ctrl

CU_DC, CU_DC_R, Can be changed: U, T
CU_DC_R_S,
Data type: Integer16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Setting to control the measurement function.
Value: 0:
1:
2:
3:
p4703[0...1]

Trace options / Trace options

CU_DC, CU_DC_R, Can be changed: T
CU_DC_R_S,
Data type: Unsigned16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
-
Description: Sets the options for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Bit field: Bit
00
Dependency: Refer to: p4700
Note: Re bit 00:
0: The trace starts with p4700 as before.
1: When powering up, the trace starts immediately with the saved parameter settings with the start of the time slices.
r4705[0...1]

Trace status / Trace status

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Integer16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Displays the actual status of the trace.
256
Stop trace
Start trace
Start trace and save values
Stop measuring function
Start measuring function
Measuring function check parameterization
Start measuring function without enable signals
Signal name
Automatically start trace with time slices
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
2
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
3
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
1 signal
Yes
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
4
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0000 bin
0 signal
No
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
SINAMICS DCM
FP
-